Assignments

                                         Shutter Speeds 

                               Pinhole Camera Questions 

1. Camera Obscura~ A darkened box device which images are of external images. They show natural colours on a surface to receive them.

2. Pinhole Camera~ A camera with no lens but a small pinhole to let light in.

3. Exposure time (generally speaking)~ Length of time a camera shutter is open when taking a picture.

A) Bright sun- Reflecting a lot of light.

B) Cloudy/overcast- Covered by clouds?

C) Indoor using window light~ Using the window sun to take pictures of natural sunlight.

D) Indoor away from the window~ Using the shades of the light

4. Camera shake~ Reduce blurring with the motion of a camera

5. Exposure with bright sun and shade together~ The sun goes well with the shade

6. Exposure and size of the camera~ It has to do with the print not the size of the camera.

7. Moving objects taken with a pinhole~ it will make the image blurry and not very nice looking.

8. Exposure directly into the sun~ Exposed from the light of the sun for a few seconds.

9. "Light leaks" / how do you know if you have them and how to fix them~  A hole in the camera where light is leaked. You would know of your print is all black and you would fix it by putting electrical tape over it.

10. What does the developer do~ The developer makes the image start to show on the photo paper.

11. What does the stop bath do~ The stop-bath stops the chemicals on the page

12. What happens in the fixer~ The fixer basically just helps fix up the picture.

13. Why do we wash prints~ To get the chemicals off the prints.

14. What are safe lights~ They are lights that don't give off light on prints.

15. What are fixer spots?~ Defects on a print resulting from fixer that was not washed off during the developing process.

16. Why agitate chemicals when printing?~ Prevent spotting, streaking, or staining on the finished print.

17. Why should you be concerned with in chemicals and skin contact?~ Because you could touch food and the chemicals left on your hand would get on the food and then if you digest it you'll get sick.

18. What do you need to be aware of in chemicals dripping into each other?~ The chemicals could have a reaction to one an other.

19. What causes prints to stick together? Prevention?~ The prints stick together because the chemicals that are on the paper get sticky so you have to try avoid putting the photos on top of each other.

20. Describe the difference between an overexposed and underexposed?~ Overexposed is when there is too much light on the print, underexposed is when the imaged is not exposed to enough light. 

                                            Aperture 

As I changed the aperture the foreground started to be less in focus and more blurred out in each picture.

                                    3Positives 3Negatives

                                     

                                     Pinhole Photography

This photo speaks to me because it looks very calm. It reminds me of going to a beach to relax and just sit on a bench and read. Its a photo that could make someone who is having a bad day happy, because it could remind them of times when they were happy.

This photo speaks to me because it reminds me of going on adventures when you were a kid, and you would go play with your friends and pretend to be the most mystical creatures there possibly was. Nobody had a care in the world because it was just for fun.

Lastly i think this photo is just really cool and it looks like a really old photo but with a lot of detail in it. This picture could mean a lot of things to a lot of people, and it all depends on how you like to see the world.